In order to insulate the foam block, which was used in the construction of supporting structures, you can use special cladding materials. In some cases, experts recommend using for insulation foam blocks, characterized by lower density. The second option will require the preparation of a wider foundation, so that you can complement the wall structure. By the way, after insulation with foam block, you can buy three-rollers on the site /.
On the inner side of the foam blocks can be wrapped with a special vapor barrier coating. This method will reduce the level of heat loss, as well as protect the structure from the formation of condensation. But it is not always necessary to perform internal insulation. For example, if the load-bearing structures of penobloc have sufficient thickness, then this step can be excluded. Do not forget that it is worth insulating not only the walls, but also the basement, the floor, and the ceiling. In this case it is necessary to use both a vapor barrier layer and thermal insulation material. In addition, it is necessary to choose properly the facing materials, taking into account the conditions of their use. If the insulation procedure is performed correctly, it will give you the opportunity to minimize heat losses, as well as reduce the cost of heating.